GES1PA Arctic Large Cubicle Shower
Manufactured from Glass Reinforced Plastic and Stainless Steel which are corrosion resistant materials, giving a
long life, and suitability for outside use.
Designed to be highly visible for ease of identification.
These units are ideal for areas to contain the water and to protect the person from climate conditions.
Suitable for non hazardous or hazardous areas. ATEX or GOST certified.
Electrical power requirement (If required) is 220-240v or 110-120v 1Ph 50-60Hz
Suitable for temperatures -40 deg C to +60 deg C
Available in Green, yellow or white. Green being standard.
- Data Sheet
- Technical Drawing
304 stainless frame, Linkages and fastenings
GRP insulated cubicle with 40mm insulation
Grp Drain sump (2” Stainless outlet)
GRP Gritted non slip floor over sump
Stainless panic bar for extra security and operation (foot operation available as option)
Stainless testing lever
Removable lifting/positioning lugs
Inspection hatch for maintenance purposes
1” BSPM inlet (other sized inlets available including flanged & NPT)
Overhead ABS rose (75 LPM)
Meets ANSI Z358.1-2014 standards
Internal wall air heater
Spring loaded doors
Electrical junction box on back of unit ( M20 entry)
All applicable Safety signs with green & white stripes
OTHER MODELS AVAILABLE
GES1A- 316 - As above and manufactured from 316 stainless frame.
Internal eyebath with lid
Shower foot platform
Remote operational alarms
Alarm & siren
Eyebath foot treadle
Pressure reducing valve
Dry area/changing room on front of shower