GRTS25L REMOTE HEADER TANK
Manufactured from Glass Reinforced Plastic and Stainless Steel which are corrosion resistant materials, giving a
long life, and suitability for outside use.
Designed to be highly visible for ease of identification.
These units are ideal for areas where there is no water supply; interrupted water supply; low water pressure to guarantee
correct flow rate or a tepid water supply to another safety shower unit.
Suitable for non hazardous or hazardous areas. ATEX, GOST & CSA Certified
Electrical power requirement (If required) is 220-240v or 110-120v 1Ph 50-60Hz
Suitable for temperatures -20 deg C to +40 deg C
Available in Green, yellow or white. Green being standard.
- Data Sheet
- Technical Drawing
GUARANTEED 30 MINUTES OF TEPID WATER
Green pre-insulated, sealed tank (2500 Litres)
2x 3/4” brass ball float valves & 6” plastic floats suitable for 2-10Bar water supply pressure. (Low Pressure valves also available)
Screened overflow (40mm)
304 stainless frame
Removable lifting/positioning lugs
Inspection hatch in lid for maintenance purposes
1” BSPM inlet (other sized inlets available including flanged & NPT)
2” BSPM outlet (other sized inlets available including flanged & NPT)
Flow from header tank - (75 LPM)
Meets ANSI Z358.1-2014 standards
All applicable Safety signs with green & white stripes
OTHER MODELS AVAILABLE
ATANK25-CSA - As above but supplied with a 2500Litre fire retardant header tank
Water level indicator
Water temperature alarm
DOWNLOAD INSTALLTION & OPERATING INSTRUCTIONS HERE